- 1U rack PDU with display to indicate total PDU power consumption in amps.
- Optional ATS (Auto Transfer Switch) function enables setup for hot-swappable UPS maintenance bypass, dual UPS protection or dual AC input redundancy for critical single-corded network hardware.
- 15A 120V capacity with 8 NEMA 5-15R outlets and 2 NEMA 5-15P input connections.
- Switchover between primary and secondary power sources occurs in 2-7 milliseconds.
- Optional SNMP network interface supports individual outlet control and remote monitoring of PDU loading and site electrical conditions.
- 2-Year Limited Warranty.
Product Description
-------------------
Tripp Lite Metered ATS/ auto transfer switch provides a
redundant power option for single-corded network devices. Dual
input cords support separate connection to primary and secondary
power sources. The ATS will normally maintain continuous output
to all outlets as derived from the primary input cable. If the
primary power source becomes unstable or fails altogether, The
ATS will switch over to the secondary power source until the
primary input is restored and stable. Super-fast switchover
between primary and secondary power sources occurs within
milliseconds. Ats functionality is supported by any two
compatible AC power sources, regardless of phase angle, to
support a variety of advanced redundant power networking
applications. Enables fault tolerant hot-swappable UPS protection
when used with a single UPS and fully redundant UPS protection
when each cord is connected to a separate UPS system. In a two-up
environment, The primary input cable must be supported by a full
time sine WAVE ups with zero transfer time. Tripp Lite smart
online Series is highly recommended for use as the primary UPS in
a two-up application. Ats configurations utilizing separate mains
circuits, backup Generators and even separate utility power Grid
feeds are fully supported. On-board ATS processor constantly
evaluates power quality on both input sources to prevent transfer
to the secondary source when unavailable or of lower quality than
the primary source. Front input Lad's display primary or
secondary power availability.
From the Manufacturer
---------------------
Do you need an efficient, cost-effective way to distribute,
monitor and manage power in an IT or industrial environment?
Tripp Lite's PDUMH15AT Metered Power Distribution Unit with ATS
is the solution you seek! It provides eight outlets plus a
digital meter that displays continuous power consumption,
enabling IT personnel to monitor the PDU's load on site. Optional
integrated automatic transfer sw capability enables dual
AC input redundancy for critical network hardware, hot-swappable
UPS maintenance bypass or dual UPS protection. The PDUMH15AT is
also equipped with a built-in SNMPWEBCARD slot, enabling it to be
permanently upgraded to a switched PDU. The PDUMH15AT features an
all-metal housing and a switchless design to prevent accidental
shutoff. It is suitable for 1U or 0U (vertical) rack
installation as well as wall-, workbench, under-counter and
similar installations.
Key Features
------------
Reliable IT Power Distribution
Click here for a larger image
Digital Current Meter
Click here for a larger image
Reliable IT Power Distribution
------------------------------
The PDUMH15AT is optimized for reliable distribution of alternate
waveform AC power from a UPS system, generator or utility wall
outlet to supported equipment in IT environments. It provides
eight 5-15R outlets and dual 12-ft. cords (one attached, one
detachable) with standard 5-15P plugs. The PDUMH15AT features a
rugged all-metal case, high-quality outlets and plugs and a
switchless design to prevent accidental shutoff. Unfiltered
electrical pass-through makes the PDUMH15AT ideal for
distributing alternate waveform UPS or generator power in rack
enclosures, network closets, and more.
Integrated Auto-Transfer Sw
----------------------------------
The PDUMH15AT features optional integrated automatic transfer
sw (ATS) capability to provide a redundant power option
for networking and server applications with non-redundant
internal power supplies. In ATS mode, the attached power cord
delivers primary input power and the included detachable power
cord provides secondary input power. If primary power becomes
unstable or fails, the PDU automatically performs a super-fast
(2-7 milliseconds) switchover to the secondary power source.
Front-panel input LEDs indicate primary or secondary power
availability.
Hot-Swap Capability
-------------------
ATS functionality makes the PDUMH15AT ideal for adding redundancy
to single-corded devices. When used with a single UPS system, it
provides fault-tolerant hot-swappable UPS protection for
applications requiring zero downtime. When each of its power
cords is connected to a separate UPS system, the PDUMH15AT
provides fully redundant, zero-downtime UPS protection.
Digital Current Meter
---------------------
The PDUMH15AT is equipped with a digital LED meter that displays
the total connected equipment load. This meter enables IT
personnel to monitor the total load on the PDU in real time,
allowing more equipment to be safely connected with no danger of
overloading the PDU or power supply circuits. This helps to
assure proper load balance in complex redundant power
applications.
Optional Advanced Power Management
----------------------------------
A built-in SNMPWEBCARD slot enables the PDUMH15AT to be
permanently upgraded to a switched PDU with full network power
monitoring and individual outlet control capability. With an
SNMPWEBCARD installed, the PDUMH15AT can also be custom
programmed for power-on and power-off sequences with
user-specified time delays in response to loss and restoration of
primary input power.
Optimized for Demanding Applications
------------------------------------
The PDUMH15AT is designed for reliable distribution of AC power
to supported equipment in IT, industrial and similar
applications. It features a rugged all-metal case, high-quality
outlets, a 15A circuit breaker and a switchless design to prevent
accidental shutoff.
Versatile Installation Options
------------------------------
The PDUMH15AT is easy to integrate with a wide range of data
center and network applications. It is suitable for 1U
installation in standard 19-inch rack enclosures as well as
wall-, workbench, under-counter and similar installations.
Technical Specifications
------------------------
Tripp Lite PDUMH15AT Metered Power Distribution Unit with ATS
-------------------------------------------------------------
Click here for a larger image
What's in the Box
-----------------
* PDUMH15AT Metered PDU with ATS
* ing Hardware
* Detachable C13 to 5-15P Power Cord
Protect, Power, Organize and Control with Tripp Lite
----------------------------------------------------
Tripp Lite UPS Systems and accessories are available with a wide
range of features to provide reliable, cost-effective power
protection and connectivity solutions for all electronics.
PDUMH15ATNET Switched/Metered Power Distribution Unit with ATS
--------------------------------------------------------------
Switched/metered 1U rack PDU with 16 x 5-15/20R outlets,
dual 12-ft. power cords with L5-20P plugs (5-20P plug adapters
included) and integrated automatic transfer sw (ATS) to
support connected equipment from a secondary power source if
primary input fails. The PDUMH15ATNET provides 20A 120V capacity,
remote power management and individual outlet control via a
secure web/network interface, a digital amp meter for on-site
monitoring of total PDU load, and sequential outlet power-on
capability to prevent inrush-related equipment interaction on
startup. Switchless, circuit breaker-free design prevents
accidental shut-off. 2-year warranty.
PDUMH20AT Metered Power Distribution Unit with ATS
--------------------------------------------------
Metered 1U rack PDU with 16 x 5-15/20R outlets, dual 12-ft.
power cords with L5-20P plugs (5-20P plug adapters included) and
integrated automatic transfer sw (ATS) to support
connected equipment from a secondary power source if primary
input fails. The PDUMH20AT provides 20A 120V capacity and a
digital amp meter for on-site monitoring of total PDU load.
Built-in card slot accepts an optional SNMPWEBCARD for permanent
upgrade to a switched PDU. Switchless, circuit breaker-free
design prevents accidental shut-off. 2-year warranty.
SU1500RTXL2Ua SmartOnline™ UPS System
-------------------------------------
True on-line operation with pure sine wave output and zero
transfer time provides the highest level of protection for
mission-critical equipment. The SU1500RTXL2Ua features
1500VA/1200W power capacity with 6 outlets (2 individually
controllable). One USB port and one DB9 port with included cables
and PowerAlert power management software provide complete power
network monitoring and control. The SU1500RTXL2Ua supports
connected equipment for 14 minutes during power failures at a
half load of 600 watts and runtime is expandable with optional
external battery packs. $250,000 Ultimate Lifetime Insurance;
2-year warranty.
B020-U08-19-K NetDirector™ Console KVM Switch
---------------------------------------------
Controls an entire network in just 1U of rack space. The
B020-U08-19-K combines a keyboard, 19-in. LCD screen, touch pad,
numeric keypad, and 8-port KVM switch in a 1U slide-out unit. It
is USB or PS/2 compatible with 8 included PS2/USB Combo Cable
Kits for connection to servers. Controls up to 504 servers by
daisy-chaining additional KVMs. Includes two front-ed USB
ports: one for attachment of a separate USB mouse and one to
connect USB peripherals (flash drive, external hard drive, etc.)
that can be shared between connected servers.
SRCOOL12K Self-Contained Portable Air Conditioning Unit
-------------------------------------------------------
Compact, portable air conditioning unit is ideal for wiring
closets and other space-critical locations where facility air
conditioning can't reach. 12,000 BTU of cooling power. Connects
to a standard 5-15R receptacle; no adapter required. Uses
EPA-compliant R410a refrigerant. Standard louvered vent for
general room cooling; ducted vent to direct cold air where
needed. Requires no floor drain or water collection tank. 1-year
warranty.
SR42UB SmartRack™ Enclosure
---------------------------
Premium 42U rack enclosure organizes and secures all standard
rack equipment. The SR42UB features locking, removable,
reversible front and rear doors; locking, removable side panels
keyed alike with doors; 4 interior vertical posts with unthreaded
square-hole openings; preinstalled casters and leveling feet; and
3000-lb. stationary/2250-lb. rolling load capacity. The SR42UB
ships fully assembled and comes with a 5-year repair/replacement
warranty. A full range of rack accessories is also
available.