Factory/OE Design Fender Flares for 2007-2013 Chevrolet Silverado. Set of 4 (Standard Bed (6'6") / Long Bed (8') Models) | DOES NOT FIT ANY GMC TRUCKS

Fantastic product and great fit. I purposely installed these during the summer for the heat, so the adhesive would bond to the truck even better. I pointed the truck side I was working on at the time, towards the sun to heat the surface up. The double sided tape will definitely not be coming off anytime soon. I did use my heat gun to mold the bond even better in some places. I was very happy with the product from the start. Easy directions to follow, and simple installation. I have a 2010 Silverado, and these flares look great on my truck. Patience is definitely required, as readjusting is needed when fitting. If you can change a flat tire, you can easily install these flares to your ride. It took about 30-45 minutes per flare to install-so take your time. I first installed and tightened all the hardware first, then pulled the double-sided tape backing off. Throw away the white plastic fittings. Instead just drill a hole and use a screw on each side where the white fitting was supposed to go. The white plastic fitting does not fit well in the oval holes in the wheel well. Definitely worth the money, great look with or without paint/Line-X.

Good product fit perfect nice and tight

Their QC fail? Or my incorrect assumption? Quality and fit "seem" good. Was expecting a fairly easy installation. Wrong. No holes were drilled in the flairs at all. Now I'm looking at having the installation done for me. No jackstands to raise the truck. At age 66 I'm no invalid. But working kneeling or bent over for even a fairly short period is not happening. It's what I get for abusing my body years ago. Update. After life getting in the way of having fun. Repeatedly. Was planning on getting these mounted. Double checked packaging more closely only to find no hardware had been included. Contacted the seller, who promptly replied asking for my shipping address inorder to correct the oversight. 2 thumbs up. If, things go as planned. I will return to post once flares are mounted. Post pics, weather permitting as winter is nearing here. No pics. But as others have said. Adhesion is a problem. The front edge of the right front flare has come loose. Purchased some 3M double sided tape to redo that flare. Have plenty. But hoping to only have the one failure.

Bought these to hide the bed rust that’s common on this body style of GM pickup. Straightforward to install, all hardware was included. Front flares used stock hardware mounting points. Design matches other OEM trim very well. Other reviews have mentioned the adhesive pulling back - have only had them for a month, but they are flush & secure so far. Might paint the rear inner fender flat black to match the front & flares. Otherwise like the black contrast with the white truck. Would buy again.

I was worried about buying these type of fender flares due to a lot of negative reviews and many options. I’m glad I bought these. The fit was very good. Better than I expected. I applied them during the summer and the tape stuck excellent. The only negative was many of the hole marks they give you to pre drill do not line up. I ended up marking and drilling them myself. The rear I just drilled the s of tapper screws through the flares and the fender lip at the same time where I felt appropriate. I then released the adhesive tape while a helper gently pulled the edge of the flare away from the truck as I went along. Worked out great

I have ordered two sets of flares from Monkey Autosports and have been extremely pleased with the product. They look great, are not bulky, and offer both great coverage and an outstanding look. Joe and the crew at Monkey Autosports provide superior customer service and care throughout the order and installation process. Again, for fit, quality, styling, and customer service I am not sure there is a better flare on the market.

These flares are a great value, and do a great job covering over areas where my old truck has started to rust out on the bed fenders. They align okay for the most part, but I found on my 09 the very bottom is a bit long and doesn't quite wrap in with the body, requiring a heat gun and some modification. The tape included is also useless, so you definitely need to invest in the 3M trim tape that actually holds. Also, I found it's better to use tape on the inside of the wheel well arch, then drill and use body screws to hold things solidly in place instead of just relying on the tape, then go back and use the tape on the edge of the upper side where it sits against the body to form a seal. Overall, I'm happy with them for what they are, and since they cover up the body rust that would cost me thousands to repair, they're definitely the better option.

I had a price break during shipping, didn't know it till after the amazon return date. Contracted monkey autosports. And they said there is no problem at all sending the new part. Got this response within 12 hours of asking. Best customer service on Amazon. Should have slowed down before posting anything yesterday. They deserve a better review than I can think of writing. The parts fit well and appears it will be a very easy install. The front ones use existing screw holes already on the truck, the rear comes with clips that go in the existing holes as well. Good product

These worked perfectly. Nice and snug. Really adds to the look of the truck. Easy to install. Work definitely recommend them.

Bon produit . S adapté bien à mon camion

Je n’est pas utilisé la quincaillerie qu’il fournissait, j’ai utilisé des vis autovisseuses pour les installer. Il n’avait pas collants 3M de fourni avec le kit d’installation et j’ai dû en acheter pour aider à coller le rubber. Les instructions ne sont pas facile. J’aime le look qu’ils donnent sur les ailes de mon camion silverado 2007. Le devant est facile à installer, vous prenez les mêmes trous de compagnie, mais pour l’arrière ça va mieux lorsque vous êtes deux!! Je recommande!!

Didn't bother with the supplied instructions. There is a great step by step video on YouTube. Just searched the product name. Very happy.

I INSTALLE THIS PRODUCT ON A 2007 CHEV SLIVERADO 1500 WT. THE FRONT FLAIR WENT ON VERY EASILY. FACTORY HOLES MATCHED UP WELL AND FORM FITTED TO FENDER VERY WELL. THE REAR FENDER FLARES HAD SOME ISSUES ONLY 2 OF THE FACTORY MOUNT HOLES LINED UP WITH HOLES ON THE FENDER. THERE WAS A WIDE GAP BETWEEN THE MOUNTING EDGE OF FLARES AND MOUNTING EDGE OF REAR FENDERS WERE THE FACTORY HOLES ARE ON THE FLARES. COULD BE A BETTER FIT OF MOUNTING EDGE OF FLARES WITH MOUNTING EDGE OF FENDERS ENDED UP DRILL NEW HOLES ON MOUNTING EDGE OF FLARES WERE THEY MADE BETTER CONTACT WITH FENDER. USED PLASTIC BODY PANNEL RIVETS TO MOUNT FLARES. GOOD TIGHT FIT NO RUSTING. FLARES CONTOURS FIT WELL TO FENDER CONTOURS. THE FLEXIBLE FINISHING GASKET FINISHES OFF THE LOOK NICELY